Trunnion free retaining ring how to install it? Reasonable installation is very important for the retaining ring without ear, so what should be paid attention to when installing the retaining ring without ear?
1. When the position of the snap ring is determined, the gap between the two pipe ends should be determined by calculation according to the elongation of the pipe and the ambient temperature during construction. The size deviation shall be ensured during construction.
2. On the premise of a certain moving distance, the greater the error of the height and width of the weld between the snap ring and the end pipe and the perpendicularity of the snap ring plane and the end pipe axis, the smaller the expansion of the joint and the worse the use effect.
3. Control the distance L between the snap ring and the end tube. When the gap between the two pipe ends is l small, ensure that the snap ring just sticks to the inclined plane.
4. The splashing impurities during the welding of the non ear retaining ring affect the sealing of the end pipe. Before installation, remove the welding slag on the sealing surface to ensure the sealing effect.
Therefore, pay attention to these details when installing the ear less retaining ring to ensure its good performance.
For more information about the earless retaining ring, please visit the official website: https://www.lispring.com//
