All Categorys

Multi Turn Wave Springs with Shim End Beryllium Copper

Send Inquiry Contact Us

Products Description

Multy-turn wave spring with Shim Ends 17-7ph Carbon / Stainless Steel

Description:

1.MultiWave springs are made of a single filament of round-edged, pre-tempered flat wire from a continuous coil. This results in uniform diameters and wave heights. They replace conventional round wire springs when space is critical, typically occupying only 1/3 to ½ of the compressed height space, while providing more deflection with the same load specifications. 

2.MultiWave springs should be used for all applications requiring tight load deflection specifications where axial space is critical.

Specification:

Part No.	Operates in Bore Diameter	Lears Shaft Diameter	Load	Work Height	Free Height	Waves	Turns	Thinkness	Radial Wall	Spring Rate
Part No.	mm	mm	(N)	mm	mm	Waves	Turns	mm	mm	N/MM
LM15-H1	15	10	80	3.2	5.18	3.5	3	0.25	1.47	40.4
LM15-L1	15	11	25	2.57	5.18	2.5	3	0.25	1.47	9.58
LMS15-M1	15	10	50	3.43	5.18	3.5	3	0.23	1.47	28.57
LMS15-H2	15	10	80	4.19	6.91	3.5	4	0.25	1.47	29.41
LMS15-L2	15	11	25	3.43	6.91	2.5	4	0.25	1.47	7.18
LMS15-M2	15	10	50	4.57	6.91	3.5	4	0.23	1.47	21.37
LMS15-H3	15	10	80	5.23	8.64	3.5	5	0.25	1.47	23.46
LMS15-L3	15	11	25	4.27	8.64	2.5	5	0.25	1.47	5.72
LMS15-M3	15	10	50	5.72	8.64	3.5	5	0.23	1.47	17.12
LMS15-H4	15	10	80	6.27	10.36	3.5	6	0.25	1.47	19.56
LMS15-L4	15	11	25	5.13	10.36	2.5	6	0.25	1.47	4.78
LMS15-M4	15	10	50	6.86	10.36	3.5	6	0.23	1.47	14.29
LMS15-H5	15	10	80	7.32	12.09	3.5	7	0.25	1.47	16.77
LMS15-L5	15	11	25	5.99	12.09	2.5	7	0.25	1.47	4.1
LMS15-M5	15	10	50	8	12.09	3.5	7	0.23	1.47	12.22
LMS15-H6	15	10	80	8.36	13.82	3.5	8	0.25	1.47	14.65
LMS15-L6	15	11	25	6.83	13.82	2.5	8	0.25	1.47	3.58
LMS15-M6	15	10	50	9.14	13.82	3.5	8	0.23	1.47	10.68
LMS15-H7	15	10	80	9.4	15.54	3.5	9	0.25	1.47	13.03
LMS15-L7	15	11	25	7.7	15.54	2.5	9	0.25	1.47	3.19
LMS15-M7	15	10	50	10.29	15.54	3.5	9	0.23	1.47	9.52
LMS15-H8	15	10	80	10.46	17.27	3.5	10	0.25	1.47	11.75
LMS15-L8	15	11	25	8.53	17.27	2.5	10	0.25	1.47	2.86
LMS15-M8	15	10	50	11.43	17.27	3.5	10	0.23	1.47	8.56
LMS15-H9	15	10	80	11.51	19	3.5	11	0.25	1.47	10.68
LMS15-L9	15	11	25	9.4	19	2.5	11	0.25	1.47	2.6
LMS15-M9	15	10	50	12.57	19	3.5	11	0.23	1.47	7.78